Siding Terms to Know

The more information you have, the easier and better your siding decision will be. Here is a list of terms you may here while discussing the installation of vinyl siding Michigan on your home.

• Aluminum Siding: Siding made from planks of aluminum with a baked on enamel finish.
• Backerboard: Any flat material fastened to the side of a house between the studs and siding to provide a surface to attach siding to.
• Battens: Strips of wood placed over joints in wood siding to seal the joints.

• Beading: This architectural term refers to a narrow, half round molding.
• Butt Edge: The section of vinyl siding that projects from the wall. As a rule of thumb, a larger butt edge creates a more pronounced shadow line and a stiffer panel.
• Casing: Molding of various widths used to trim door and window openings at the jambs. Also referred to as: lineal, box post, window and door surround.
• Clapboard: This architectural term refers to a thin, narrow board with one edge thicker than the other and is used as siding.
• Dutchlap: This architectural term refers to a flat, horizontal band. In the vinyl business it refers to the wide trim that runs along the roof line.
• Exposure: The width of each board of siding. Also referred to as a reveal.
• Fascia: A flat, horizontal band. In the vinyl business it refers to the wide trim that runs along the roof line.
• Finish/Pattern: Refers to the texture (and sometimes to the gloss level) of a siding panel.
• Frieze: The horizontal member connecting the top of the siding with the soffit.
• Lock: Where two siding panels join, or lock together.
• Profile: Side view of a siding panel.
• Rake: Trim members that run parallel to the roof and form the finish between the wall and a gable roof extension.
• Shadow Line: The shadow pattern cast by a particular siding in the sunlight. Shadow line is influenced by the style and butt height of the siding.

• Beveled: Clapboards that are tapered rather than cut rectangular.

• Buttlock: The bottom edge of a piece of vinyl siding which locks into the previously installed panel.

• Caulking: Material used to seal joints at intersections of different materials. Used with different types of siding to join the siding to pre-existing materials.
• Channel: The area where siding and soffit panels are attached to the trim or corner post. Also refers to the trim itself, which is named for the letters of the alphabet they resemble (J-channel, F-channel, etc).
• Checking: A split or crack that appears along the grain of wood siding.

• Composition Board: Siding that is composed of weather resistant, compressed wood material.
• Course: A row of siding.
• Cupping: When a warp develops in wood plank siding.
• Double Course: When an underlayer of shingles or shakes is covered by a new application of siding.

• Face: The siding that is visible once it is installed.

• Flashing: A layer of sheet metal used under siding on windows and doors to prevent water from penetrating the home.

• Gable Vent: A vent placed in the gable of a home that increases air flow to the attic, thereby reducing heat and moisture buildup.
• Gable: The triangular end of a house that stretches between the eaves and the ridgeline of the roof.
• Lap: The overlapping of two siding panels to allow for expansion or contraction of the siding material.

• Nailing Hem: The section of siding where the nail slots are located.
• Overhang: The portion of the roof that extends beyond the walls of a home. The soffit or eave is the underside of an overhang.
• Panel Protection: The amount that a panel of vinyl siding sticks out from the wall. You should choose the largest profile available for any siding in order to prevent weather damage to the wall of the house.
• Plywood Siding: Plywood siding that comes in grooved or decorative patterns.

• Scoring: The process of running a sharp object, such as a utility knife, across a siding panel without cutting all the way through. The panel can then easily be broken off cleanly along the line of scoring.

• Single Course: Wood shingles or shakes applied so each course is exposed to the elements.
• Soffit: The underside space between the end of the roof and the side of a home, often vented to provide circulation to the attic.
• Square: A measurement that equals 100 square feet of siding.
• Stucco: A cement, sand and water finish to a home that is water resistant. Available in a variety of finishes and styles.
• Tongue and Groove: A way of connecting materials, such as wood, in which the tongue of a board is placed into the groove of the board following it.
• Vinyl Siding: Polyvinyl chloride siding that comes in a variety of colors and styles and is virtually maintenance free.
• Wall Sheathing: Sheets of plywood or wood planking used to cover the wall framework of the house.
• Weep Holes: Openings cut into a siding material to provide for water runoff.
• Wood Plank Siding: Rectangular wood planks that can be installed either horizontally or vertically.
• Wood shakes: Rough, thick, uneven shingles, either hand split or sawn, that can be used as a siding material.
• Wood shingles: Shingles made of wood that are sawn and of uniform thickness.

GET A FREE SIDING ESTIMATE

Complete the request form at the right and we’ll schedule a FREE in-home consultation and estimate for vinyl siding. Or call us at (888) 338-6340 to schedule your free consultation by phone.

We look forward to earning your trust and building a lasting relationship with you!